Need help?Do you have a question about the Sonel MPI-520 and is the answer not in the manual?
General| Resolution (Resistance) | 0.01 Ω |
|---|---|
| Test voltage (Insulation) | 250 V, 500 V |
| Display | LCD |
| Power Supply | 6 x AA batteries |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +60°C |
| Current measurement range | 0.1 mA to 20 A |
| Capacitance measurement range | 1 nF to 10 mF |
| Insulation resistance measurement | 0.1 MΩ to 2000 MΩ |
Settings for wireless data transfer.
Configure measurement parameters and display.
Adjust display contrast, backlight, and auto-off.
Choose the operating language for the meter.
Details about the device manufacturer.
Measures network voltage and frequency.
Measures impedance and fault current in short circuits.
Measures earth resistance using the three-pole method.
Measures RCD trip current, time, and touch voltage.
Measures insulation resistance values.
Measures resistance at low voltages.
Calibrates test leads for accurate resistance measurements.
Stores measurement results in the meter's memory.
Accesses and displays stored measurement results.
Transmitting data via USB connection.
Instructions for replacing batteries or accumulators.
General technical specifications and ranges.
List of included accessories and test leads.
To Next Page
