5 Data transmission
Remarks:
- Data transmission is not possible during the charging of accumulators.
5.1 Computer connection accessories
What is necessary in order to operate the meter with a computer is additional accessories, name-
ly a USB cable and appropriate software. If the required accessories such have not been purchased
along with the meter, then they are available from the manufacturer or an authorised distributor.
The accessories may be used in case of many devices manufactured by SONEL S.A. which are
equipped with the USB interface.
Detailed information regarding software is available from the manufacturer or an authorised dis-
tributor.
5.2 Data transmission with USB joint
1. Set the rotational function selector at MEM.
2. Connect the cable to the USB port of the computer and the USB socket of the meter.
3. Start the programme.
5.3 Data transmission with OR-1 radio module
1. Connect OR-1 module to the USB socket of the PC.
2. Start data filing programme.
3. Select Wireless transmission in the main MENU of the meter
or set the function switch to MEM and press F1.
4. If a PIN code change is necessary, select Modify PIN code.
To Next Page
Loading...
Need help?
General
