Sonel MPI-520 - Low-Voltage Measurement of Resistance; Measurement of Resistance of Protective Conductors and Equipotential Bonding with ±200 Ma Current

MPI-520 OPERATING MANUAL version 3.4
36
Read out the results.
Remarks:
- Remarks and messages are the same as in point 3.7.1.
3.8 Low-voltage measurement of resistance
3.8.1 Measurement of resistance of protective conductors and equipotential
bonding with ±200 mA current
Set the rotary switch of function selec-
tion at R
X
R
±200 mA
position.
Press F1 push-button and move to selection of
measurement mode.