Need help?Do you have a question about the Sonel MPI-536 and is the answer not in the manual?
General| Phase sequence | Yes |
|---|---|
| Type | Multifunction Installation Tester |
| Measurement Category | CAT III 600V |
| Continuity Measurement Current | 200 mA |
| Memory | Yes |
| Data transfer | USB |
| Power supply | Battery pack |
| Battery Type | Li-ion |
| Weight | 1.2 kg |
| Operating Temperature | -10...+50 °C |
| Storage Temperature | -20...+70 °C |
Essential precautions for safe operation and preventing hazards.
Overview of the main screen elements and navigation.
Adjusting date, time, auto-shutdown, and display parameters.
Configuring network parameters, fuses, and measurement options.
Connecting via USB, Wi-Fi, and configuring e-mail.
Procedures for updating the meter's firmware via USB or Wi-Fi.
Setting language and viewing device details.
Understanding measurement results against set limits.
Measuring AC voltage and network frequency.
Verifying the integrity of protective earth connections.
Measuring fault loop impedance (ZL-N, ZL-PE, ZL-PE[RCD]).
Calculating voltage drop between two points in the network.
Measuring earth resistance using various methods.
Measuring soil resistivity using the Wenner method.
Measuring RCD tripping current (IA) and time (tA).
Measuring insulation resistance using probes or adapters.
Measuring continuity and resistance with low voltage.
Testing phase sequence and motor rotation direction.
Measuring illuminance using the Lux meter function.
How to select and start automated measurement sequences.
Steps to define and save custom automatic measurement sequences.
Managing memory settings, structure, and navigation.
Creating clients, locations, points, and saving results.
Accessing, viewing, and sharing recorded measurements.
Locating specific measurements within the meter's memory.
Monitoring battery charge and replacing the battery pack.
Battery charging process and general rules for Li-Ion batteries.
Instructions for meter care, storage, and disposal.
Detailed technical specifications for core measurements.
Additional specifications, compliance, and reference standards.
Details on available accessories like N-1 and C-3 clamps.
Different positions for using the meter's cover.
Manufacturer's contact details and service information.
To Next Page
