Sonel MPI-536 - Entering the Measurement Result

MPI-536 – USER MANUAL
116
5.3 Entering the measurement result
 After the measurement, se-
lect the icon.
 The menu Entering the
measurement result will ap-
pear (the menu and control
the same as in section 5.1).
 If necessary, create a new
location in accordance with
section 5.2.2.
 Select the required meas-
urement point from the loca-
tion or create a new point in
accordance with section
5.2.2 step .
 Tap to save the result to
memory.
 In case of cancellation, re-
turn to the measurement
menu using the icon.
Management of objects and sub-objects id possible both in the saving to memory mode
and memory viewing (section 5.4).