MPI-536 – USER MANUAL
Fig. 6.1. Replacing the battery pack
NOTE!
Do not use the meter when the accumulator compartment is removed or open or
power it from other sources than those mentioned in this manual.
6.3 Charging the rechargeable batteries
Charging the battery pack of the device is started automatically after connecting:
2 V DC power supply adapter,
charging cable for the car cigarette lighter.
Charging is indicated by the icon next to the battery symbol on the top bar and by the
H.V./REC/CONT. diode. The temperature of the battery and the ambient temperature influence the
charging process. If the battery temperature is below 0°C or higher than 45°C, the charging process is
stopped.
Indication of charging status
charging
o meter off – diode H.V./REC/CONT. is lit green
o meter on – charging signalled only by an icon on the display
damage
o meter off – diode H.V./REC/CONT. flashes green every 0.5 second
o meter on – error signalled by an icon on the display
Due to interferences in the network or to high ambient temperature, the charging pro-
cess of rechargeable batteries may finish prematurely. When charging time is too short,
turn off the meter and start charging again.
To Next Page
Loading...
