Need help?Do you have a question about the Sonel MIC-10 and is the answer not in the manual?
General| Type | Insulation Resistance Meter |
|---|---|
| Insulation Resistance Measurement Test Voltage | 50 V, 100 V, 250 V, 500 V, 1000 V |
| Continuity Measurement Test Current | 200 mA |
| Power Supply | 4 x AA batteries |
| Protection Class | IP54 |
| Operating Temperature | -10°C to +50°C |
| Voltage Measurement Range | 0 to 600 V AC/DC |
Provides essential safety guidelines and precautions for operating the insulation resistance meter.
Guides through setting various operational parameters like PIN, absorption coefficients, and beep signals.
Explains how to perform insulation resistance measurements using different methods.
Covers low-voltage resistance measurements, including continuity and bonding.
Details the process of measuring AC/DC voltage with the meter.
Describes how the meter stores and recalls the last measured value.
Guide on how to save measurement results into the meter's internal memory.
Instructions on how to access and review previously stored measurement data.
Procedures for deleting stored measurement results, either individual banks or the entire memory.
Lists accessories required for connecting the meter to a computer for data transfer.
Procedure for transmitting data wirelessly using the Bluetooth module.
Instructions for data transmission using the OR-1 radio module.
Explains how to check the battery level indicator on the meter's display.
Step-by-step instructions for safely replacing the meter's batteries.
Provides best practices for storing and charging NiMH rechargeable batteries.
Presents fundamental technical specifications including voltage measurement details.
Lists additional technical details like dimensions, weight, and operating conditions.
Provides information on additional uncertainties for calibration purposes.
Details additional uncertainties specific to insulation resistance measurements.
Lists additional uncertainties for protective conductor resistance measurements.
Enumerate the items included in the standard package supplied with the meter.
Lists accessories that can be purchased separately for enhanced functionality.
To Next Page
