MIC-10 / MIC-30 – USER MANUAL
3.2 Low-voltage measurement of resistance
3.2.1 Measurement of resistance of protective conductors and equipotential
bonding with 200 mA current
NOTE
The meter measures R
CONT
:
unidirectionally,
bidirectionally (±200mA).
Set the rotary switch of function
selection at R
CONT
position.
The meter is ready for
measurement.
Connect the meter to the object tested.
The measurement starts automatically when the meter detects a
resistance within the measurement range.
The measurement may be also triggered manually by pressing
START push-button.
To Next Page
Loading...
