MIC-10 / MIC-30 – USER MANUAL
and asking
you to confirm deletion.
Press ENTER again.
After deleting the memory, the meter
beeps three times and sets the bank and
cell number as "1".
5 Wireless data transmission
5.1 Computer connection accessories
In order to ensure the communication of the meter with a computer, Bluetooth module is required
with an additional software. A program that may be used for this purpose is Sonel Reader. It allows
users to read and display the measurement data stored in the meter memory. This program may be
downloaded free from the manufacturer's website: www.sonel.pl. It is also provided on DVD, supplied
with the meter. Information on the availability of other programs cooperating with the meter may be
obtained from the manufacturer or its authorized distributors.
The software may be used for many devices manufactured by SONEL S.A. which are equipped with
the USB interface and/or wireless module.
Detailed information regarding software is available from the manufacturer or an authorised
distributor.
To Next Page
Loading...
