MIC-10 / MIC-30 – USER MANUAL
If you try to store data in an occupied memory cell, the following
warning message will appear:
Press ENTER, to overwrite the result or ESC, to
cancel saving.
Notes:
- Complete set of results (main result and supplementary results) for a given measuring function and
preset measurement settings/conditions are stored in the memory (e.g. ) .
- In a given cell you can not simultaneously save the measurement result of R
ISO
obtained by double-
lead method and the result obtained by using WS-04 adapter.
4.2 Viewing memory data
Set the rotary switch of function
selection at MEM position.
Use SET/SEL to select active cells or banks which
may be changed.
Use and to change the number of a cell or
bank.
Use and to view the results.
Notes:
- While viewing R
ISO
results, the field of timer / memory displays alternately bank and cell numbers and
the time in which the result was entered into memory. This applies to all R
ISO
and I
L
measurements.
To Next Page
Loading...
