Sonel MIC-10 - Page 20

MIC-10 / MIC-30 – USER MANUAL
18
The cell is occupied
by a different type of
result, than the one
which is to be
entered.
Use and to preview the results stored in the
memory cell.
The cell is fully
occupied.
Use and to view the results.
Use SET/SEL to select active cells or banks which
may be changed.
Use and to change the number of a cell or
bank.
Press ENTER, to save the result in the memory
or ESC to display the result without saving it.
Saving is indicated by a triple beep and by a
rectangle displayed on the main display field.