MPI-536 – USER MANUAL
2.4 Update
NOTE!
Before you proceed to software update, charge the accumulators.
Do not switch off the meter while updating.
2.4.1 Update via USB
The update file can be downloaded from the manufacturer's website.
Save the file to a USB drive. The memory must have the FAT32 file system.
Select Settings ► Update to open the update menu.
Insert the USB memory in the
Type A USB port in the meter.
The information screen will ap-
pear.
To start the update process, se-
lect Ok in the information win-
dow.
Alternatively, you can press the Update via Wi-Fi button. Then follow the procedure de-
scribed in sec. 2.4.2.
2.4.2 Update via Wi-Fi
Connect to the Wi-Fi network according to sec. 2.3.2.
Choose one of the following.
Go to Settings ► Software update and select Update via Wi-Fi.
Restart the meter.
The device will automatically check if a software update is available. If it is, a window is dis-
played asking the user to accept the update.
To start the update process, select Ok in the information window.
Security features inside some networks may prevent the meter from being able to con-
nect to the manufacturer's server with updates – then the following message will be dis-
played: Unable to update Wi-Fi...
To Next Page
Loading...
Need help?
General
