Sonel MPI-520 - Measurements with Autoiso-1000 C Adapter

MPI-520 OPERATING MANUAL version 3.4
33
3.7.2 Measurements with AutoISO-1000c adapter
Set the rotary switch of function selection at
R
ISO
position.
Adapter
AutoISO
1000c
Connect AutoISO-1000c adapter.
The meter detects this fact auto-
matically and changes the appear-
ance of the screen.
Press F1
U
N
push-button
and move to selection of test
voltage U
N
.
Press F2
MODE
push-button
and move to selection of lead
type (3-, 4- or 5-wire lead).
Press F3
TIME
push-button
and move to selection of a
single measurement time.
Select an appropriate item by means of and
push-buttons and confirm by pressing
ENTER.
Connect AutoISO-1000c adapter to the lead tested.
Adapter
AutoISO
1000c