Sonic-FX FX User Manual

Install Brush Head: To install brush head, push brush
head all the way down over the tip of the toothbrush
body as shown. Give a slight twist to the left until the
brush head clicks securely into place. Bristles must be
aligned with the power buttons on the brush body. To
remove brush head, twist right to release and then
remove.
Charge Toothbrush (Please charge as soon as possible
after purchasing): Connect the power adapter with the
back of the charging base as shown and place the
unit on a flat surface and in a location where there is
no water spray. Plug into power outlet. When the
toothbrush is placed on the charging peg, the
charging indicator lights up while charging and turns
off when fully charged. The base of the toothbrush
must be in full contact with charging base in order for
charging to take place. Ensure that toothbrush is
charged for 18 hours before first use. Leave the charge
stand plugged into power outlet for normal daily use.
Warnings:
• Use only with power adapter supplied with this product or malfunction may occur.
• Base unit is not waterproof. Do NOT immerse in water under any circumstance.
super
normal
massage
charge
Magnet
UV sanitizer
UV lamp
Body
Brush heads
Power
button
Mode
button
Sanitizer
cover
Charging base
Brush head pegs
Charging peg
Charging and
mode indicator
DC plug
Power adapter
DC plug
Charging
base
Charging
peg
Charging
indicator
Back of
brush head
Back of
body
Please read the entire instructions before using this product.
Please use product only in accordance with these instructions.
Instruction
Manual

Sonic-FX FX Specifications

General

Brand	Sonic-FX
Model	FX
Category	Electric Toothbrush
Language	English

Summary

Getting Started with Your Sonic-FX Toothbrush

Install Brush Head

Push brush head down over the tip of the toothbrush body, twist left to secure. Twist right to release.

Charge Toothbrush

Connect power adapter to base, place toothbrush on charging peg. Charge for 18 hours before first use.

General Safety Warnings

Use supplied adapter only. Base unit is not waterproof; do not immerse in water.

Using and Sterilizing Your Sonic-FX Toothbrush

How to Use Sonic-FX Toothbrush

Wet brush, add toothpaste, press power. Use Quadrant Method for 2 minutes. Notifies every 30 seconds.

Sterilize Brush Heads

Place brush heads on peg inside UV sanitizer, close cover. UV lamp lights for 3-5 minutes for sterilization.

Important Usage Warnings

Do not exert pressure. Avoid abrasives. Place brush head in mouth before powering on.

Product Support and Specifications

Troubleshooting Tips

Check connections for power issues. Charge for 24 hours if performance is strange.

Cleaning and Maintenance

Rinse bristles after use. Replace heads every 3 months. Clean body with damp cloth.

Product Specifications

Materials: ABS, nylon. Body Size: approx. 126x62x258mm. Weight: approx. 250g.

Warranty and Technical Assistance

3-month warranty. Contact 1205 NE 95th St. STE A, Vancouver, WA 98665 for support.

Critical Safety Precautions

Serious Injury or Death Warnings

Keep away from children, fire, high temperatures. Do not look at UV lamp. Unplug if smoke occurs.

Potential Injury Warnings

For household use only. Charging base not waterproof. Do not scratch UV lamp. Do not share brush heads.