Sonic · Step up with Pep 13
Programming Pep
Using the EXPRESSfit Fitting Software
To begin programming Pep instruments, insert a fresh battery and
connect programming cables to your EXPRESSlink
3
, HI-PRO,
nEARcom, or NOAHlink device. Launch the EXPRESSfit fitting software
to proceed.
Open EXPRESSfit
When starting a new fitting,
press Detect on the Product
Overview screen if instruments
are connected, or select an
instrument family for simulation.
Detection
With the instrument detected,
follow the prompts to start a new
fitting with the hearing instrument.
125240_Pep_Fitting_Guide_US.indd 13 07.06.12 09:16
To Next Page
Loading...
