Sonic · Step up with Pep 7
VR_ILU_MicroCompactBTERemovePin_CMYK_HI
Attaching and removing the earhook
or Thin Tube adapter
1 Use the pointed end of the disassembly tool to push the lock pin free.
2 Replace the hook or the adapter with the desired part.
3 Replace the lock pin (tweezers make this easier).
1
VR_ILU_MicroCompactBTERemoveHook_BW_HI
2
1
2
Changing Thin Tube domes
1 Pull the used dome off the tube and discard.
2 With clean hands, firmly push a new dome onto the tube
as far as it will go.
Note! If the dome is not pushed all the way onto the tube,
it could fall off in the ear canal.
125240_Pep_Fitting_Guide_US.indd 7 07.06.12 09:16
To Next Page
Loading...
Need help?
General
