Sonic · Step up with Pep 3
Table of Contents
Introduction
Pep Hearing Instrument Overview 4
Pep BTE Hearing Instruments 6
Acoustic options 6
Thin Tube lengths 6
Attaching and removing the earhook or Thin Tube adapter 7
Changing Thin Tube domes 7
Installing left and right instrument markers 8
Replacing the battery door 9
Pep ITE Hearing Instruments 10
Replacing the Wax Guard 10
Wind screen for Pep ITC instruments 11
Programming Pep with EXPRESSfit 12
Attaching programming cables 12
Programming Pep Using the EXPRESSfit Fitting Software 13
Open EXPRESSfit 13
Ordering Information 20
This document introduces you to the Pep hearing instrument family.
Here you will find step by step instructions on everything from
exchanging the Thin Tubes and earhooks, to fine tuning adjustments
in the EXPRESSfit fitting software. For additional information,
please contact your local Sonic customer care department.
125240_Pep_Fitting_Guide_US.indd 3 07.06.12 09:16
To Next Page
Loading...
Need help?
General
