SonicWALL SonicPoint-Ne - Page 44

SonicWALL SonicPoint Getting Started Guide Page 43
Declaration of Conformity
Certificate #: EU00170-A
This device is a 2.4 GHz wideband transmission system (transceiver),
intended for use in all EU member states and EFTA countries, except in
France and Italy where restrictive use applies.
In Italy the end-user should apply for a license at the national spectrum
authorities in order to obtain authorization to use the device for setting
up outdoor radio links and/or for supplying public access to
telecommunications and/or network services.
This device may not be used for setting up outdoor radio links in France
and in some areas the RF output power may be limited to 10 mW EIRP
in the frequency range of 2454 – 2483.5 MHz. For detailed information
the end-user should contact the national spectrum authority in France.
I, the undersigned, hereby declare that the equipment specified above conforms to
the above Directives and Standards. Quality control procedures will ensure series
production of equipment will be compliant.
Application of council
Directive
2004/108/EC (EMC)
2006/95/EC (LVD)
1999/5/EC (R&TTE)
Standard(s) to which
conformity is declared
EN 55022:1998 +A1 +A2 Class B
EN 55024:1998, +A2
EN 61000-3-2:2000, +A2
EN 61000-3-3:1995, +A2
EN 60950-1:2006, +A11:2009
National Deviations: AR, AT, AU, BE, CA, CH,
CN, CZ, DE, DK, FI, FR, GB, GR, HU, IL, IN, IT,
JP, KE, KR, MY, NL, NO, PL, SE, SG, SI, SK, US
EN 300 328 V1.7.1:2006
EN 301 893 V1.5.1:2008
EN 301 489 V1.8.1:2008
EN 301 489-17 V2.1.1:2009a
EN 50385:2002
Manufacturer/
Responsible Party
SonicWALL, Inc.
2001 Logic Drive
San Jose, California 95124-3452 USA
Type of Equipment 802.11b/g/n access point
Type Numbers APL21-06E
APL21-083
May be Marketed as SonicPoint-Ne
SonicPoint-Ni
Signature /s/ Larry Wagner_________
Sr. Engineering Director
Date 05/30/10