EasyManuals Logo

SonicWALL TZ 215 Series User Manual

SonicWALL TZ 215 Series
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Quick Start Guide
Check Package Contents
Verify that your package includes the following
contents:
SonicWALL TZ 215 or TZ 215W Series Appliance
Ethernet Cable
Standard Power Adaptor and Cord
* Wireless Antennas (3) included with TZ 215W only
3
Connect the SonicWALL TZ 215 series
appliance to the network using standard
Ethernet cables as shown in the illustration.
4
In a Web browser, navigate to
http://www.mysonicwall.com/
If you do not have a MySonicWALL account,
click the Not a Registered User? link to
create an account.
Under the Quick Register section of your
MySonicWALL account, enter the Activation
Key or Serial Number of the SonicWALL TZ
series appliance you are registering.
Conrm your serial number, enter a friendly
name for your appliance, and enter your
authentication code in the Quick Register >
Add New Product section.
Click Register.
2
Using the computer connected to the LAN
port of the SonicWALL TZ 215 series
appliance, navigate to http://192.168.168.168/
in a Web browser.
The Setup Wizard takes you through several
basic steps to get your SonicWALL TZ series
appliance congured for your network.
Power cord is for use in North America only.
1
Connect the SonicWALL TZ Appliance
Register
Configure the Management Host &
Setup Wizard
SonicWALL TZ Series Appliances
Registration MUST be completed prior to
connecting to the appliance.
http://www.mysonicwall.com
http://192.168.168.168/
After the Setup Wizard, the appliance may
reboot. Please wait a few minutes while the
appliance reboots to save the updated settings.
*
wan
X1
lan
X0
lan wan
Internet router
or modem
Internet
Service
Provider
Connect the included power cable and adaptor,
and plug into an appropriate outlet.
lan
120V AC
(U.S.)
The TZ 215 series appliance powers on and the
orange “test” LED blinks during the boot
sequence. Continue to Step 4 when the “test”
LED is no longer lit.
This process may take up to 2 minutes.
2 min
http://192.168.168.168/
http://192.168.168.168/
With your computer connected to the X0 port
on the SonicWALL appliance, congure your
IP with an address on the 192.168.168.0/24,
such as 192.168.168.20.
security
on/act
wlan
10/100/act
1000/act
lan wan
X3 X4 X5 X6
X2
X1
X0W0
U0/U1
Network Security Appliance
10/100/1000
TZ 215
security
on/act
wlan
10/100/act
1000/act
lan wan
X3 X4 X5 X6
X2
X1
X0W0
U0/U1
10/100/1000
TZ 215
wireless-N
Network Security Appliance
security
on/act
wlan
10/100/act
1000/act
lan wan
X3 X4 X5 X6
X2
X1
X0W0
U0/U1
10/100/1000
TZ 215
wireless-N
Network Security Appliance

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SonicWALL TZ 215 Series and is the answer not in the manual?

SonicWALL TZ 215 Series Specifications

General IconGeneral
Memory512 MB
Humidity10% to 90% non-condensing
Maximum VPN Tunnels25
Interfaces5 x 10/100/1000Base-T Ethernet
Weight1 kg
Operating Temperature0°C to 40°C (32°F to 104°F)

Related product manuals