Sample File Setup -Converting-
Convert audio
The Lo-12 XT has our original Lo convert engine that makes it
easy to create the “Lo-12 sounds” .
This convert audio feature allows you to convert common stereo
audio les into the best audio les for the Lo-12 XT.
Use the card reader mode( → P.139) in advance to copy audio
les that you want to convert to the Convert folder.
See "The folder structure in Lo-12 XT" ( → P.39)
Supported WAV formats
The audio le formats that can be converted are as follows.
Sampling frequency 44.1kHz - 96kHz
Sample bit 16bit - 24bit
The characters/symbols that can be used
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
0123 4 56789
!#$%&'（）+,-.=@[]~^_{}`（ space）
• Audio les that use unsupported characters may not load
properly and an error may occur.
• Audio les longer than 40 seconds will be cut to 40 seconds.
• Unsupported audio les are not converted.
44
To Next Page
Loading...
