GETTING STARTED
Switching on/off
Function Operation LED indicator
Power on Press and hold MFB but-
ton for 3-5 seconds until
blue LED ashes
Blue LED is on for 1
second
Power off Press and hold MFB but-
ton for 3-5 seconds until
red LED ashes
Red LED is on for 1
second
Note: In order to save power, the headset will turn off automatically if no devices can
be connected after 5 minutes.
Entering pair mode
Function Operation LED indicator
Entering pairing mode Ensure the headset is
turned off, otherwise turn
it off rst and then press
and hold MFB button for
6-7 seconds
LED ashes red and blue
alternately
Note: Pairing mode will last 2 minutes. If the headset still can’t pair with any Bluetooth
devices after 2 minutes, it will return to standby mode automatically.
To Next Page
Loading...