8.Record/Play a Track (cont)
Record using a Mix of Track buttons and Selected Track
You can also record using a mix of both these methods. Start recording a loop by pressing a Track button.
Then once you finish the loop (as the track is now selected) you can use the Rec/Play All button to finish
recording and start overdub etc.
Stopping a Recording
If you want to stop a recorded track simply press the Stop button.
Playing Tracks
Once you have recorded your tracks you can switch to Play Mode by pressing the Mode Button. The red
LED above the Rec/Play All button will turn off indicating that you are in Play Mode.
In Play Mode
The Track (1-4) pedals now change function to Play/Stop. If you press a track button that is playing it will
stop that track, press again and it will start playing that track again. If more than one track is playing it will
start playing again in time with the tracks already playing. If no tracks are playing it will start the track
again from the beginning.
Play All
To Play All tracks use the Play All pedal. Again if tracks are already playing this will just play all tracks that
are currently not playing in time with the tracks that are playing. If no tracks are playing it will play all
tracks from the start.
To Next Page
Loading...