Sonnit Looper Sonnit Pedal - Extra Functions

9.Extra Functions
●
Undo (same in Play and Record Mode)
The Undo button will undo the last recording.
By pressing the Undo button again it will Redo the
last Undo. The Undo function is track specific so it
will undo/redo the last recording of the selected
track only.
●
Clear (same in Play and Record Mode)
The Clear button will remove the audio from the
selected track but keep the timing. This means you
can clear the audio from a track without affecting
the length of the loop.
●
Reset (same in Play and Record Mode)
This will remove all the audio recorded and the
timing from the tracks.
●
Multiply
The Multiply button has two different functions in
Play Mode and Record Mode.
In Record Mode
The Multiply button will simply Multiply the selected
track length by 2. Pressing the multiply button again
will multiply the track length by 2 giving you a track
4 times longer than the original etc.
In Play Mode
In Play Mode the Multiply button will activate the
select preset feature (for information on presets
please see the Sonnit software manual). Press the
Multiply button and the LED to the right will light
indicating you are in Preset Select Mode. You can
now use the Track 2 button to go down through the
presets, the Track 4 button to go up through the
presets and the Track 3 button to select the preset.
WARNING: In preset mode none of the other buttons
or pedals will function.