SONOFF TECHNOLOGIES CO., LTD.
RF Remote Controller Pairing
Long press the channel switch that you want to pair for 3s until the
LED “flashes quickly once” and release, then short press the
remote controller button that your want to pair. The red channel
switch button LED “flashes quickly once” indicates that the pairing
is successful. Other remot e controller buttons can be paire d
according to this method.
Long press the channel switch that you want to clear for 5s until
the LED “flashes quickly twice” and release, then short press the
remote controller button that your want to clear. The red channel
switch button LED “flashes quickly once” indicates that the clearing
is successful. Other remote controller buttons can be cleared
according to this method.
To Next Page
Loading...
