Need help?Do you have a question about the Sonoff DIY iFan04 and is the answer not in the manual?
General| Brand | Sonoff |
|---|---|
| Model | DIY iFan04 |
| Category | Controller |
| Language | English |
Highlights key features like remote control, timing, voice control, fan speed, smart scenes, and remote connectivity.
Instructions for powering off the device and essential safety warnings for installation and wiring by qualified electricians.
Detailed wiring diagram and critical precautions, including protective devices and correct wire connections.
Guide to downloading and installing the required eWeLink mobile application for device control.
Procedure for powering on the device and entering initial quick pairing mode, including re-entry methods.
Step-by-step instructions for adding the device to the eWeLink app using the quick pairing method.
Alternative methods for pairing the device using compatible mode if quick pairing fails, including app and device steps.
Instructions on how to learn and pair the RM433R2 remote controller with the iFan04 device.
Guidance on removing the battery insulation sheet from the RM433R2 remote controller to enable its use.
Instructions on how to change the Wi-Fi network settings for the device via the eWeLink app.
Provides three methods to re-establish the pairing connection between the device and the eWeLink app.
Steps to restore the device to its factory default settings, typically by deleting it from the eWeLink app.
Detailed technical specifications for the RM433R2 remote controller, including dimensions and power.
Overview of the RM433R2 remote controller and its button functions for controlling the iFan04.
Procedure for clearing the RF code on the remote controller, typically by pressing a button for 5 seconds.
Troubleshooting common issues encountered when pairing Wi-Fi devices with the eWeLink APP.
Information regarding compliance with FCC radiation exposure limits and guidelines for safe operation.
To Next Page
