Sonoff DIY TH10 User Manual

SONOFF TECHNOLOGIES CO., LTD.
English
Wi-Fi LED indicator status instruction
Wi-Fi LED indicator status
Status instruction
Flashes (one long and two short)
Quick Pairing Mode
Keeps on
Device is connected successfully
Flashes quickly
Compatible Pairing Mode
Flashes quickly once
Unable to discover the router
Flashes quickly twice
Connect to the router but fail to connect to Wi-Fi
Flashes quickly three times
Upgrading
Features
This device is a Wi-Fi smart switch that works with temperature and humidity sensors
that allows you to remotely turn on/off the device, schedule it on/off or share it with your
family to control together.
Remote Control Single/Countdown
Timing
Voice Control Share Control Smart Scene
Temp. Monitoring Hum. Monitoring
Sync Status
Compatible Sensors
Power-on State LAN Control
Temperature and humidity sensor: Si7021, AM2301
Waterproof temperature sensor: DS18B20
Soil moisture sensor: MS01
You can connect SONOFF AL560 sensor extension cable to the sensor to monitor the
humidity level in an ideal position.
The humidity value can be checked on eWeLink app in real time and set the auto-mode:
the sensor automatically turns on/off when the temperature and humidity reaches
the preset value.
The device restarts each time the sensor is plugged into or pulled out from the device.

Sonoff DIY TH10 Specifications

General

Brand	Sonoff
Model	DIY TH10
Category	Switch
Language	English