7
Local network connection method for camera
Plug into the Ethernet cable and select "Scan QR code", then scan the QR code on
the back of the camera and select the same ID in the “Devices on LAN” list with the
current device. Tap "Confirm" to add the camera.
Make sure that your mobile phone and the Ethernet cable access the same network.
Before connecting the ethernet network, if you have connected the device via Wi-Fi
network, to ensure normal use of ethernet network, please delete the connected
device in eWeLink app.
Features
GK-200MP2-B is a Wi-Fi wireless IP security camera that can be used for real-time
monitoring. You can control the monitoring images, adjust images resolution, pan and
tilt angle, set “activity alert” notification to push an alarm message to your smartphone.
It allows you to shoot, record, remotely talk, and you can share the camera to your
family to control together.
If the TF card has been inserted, the camera will alarm and push a notification to
eWeLink APP and automatically records a 40s video and stores in the TF card when
motion detection is triggered.
The TF card is required with a transmission speed of at least class10.
Infrared night vision
Built-in 2 infrared night vision LEDs which ensure the night vision distance of 15m.
The infrared LEDs will be automatically activated in a low-light condition to provide
a clear monitoring image.
To Next Page
Loading...