SONOFF TECHNOLOGIES CO., LTD.
12
English
In quick pairing mode, you can short press any button on the remote controller
to exit this mode.
Mute
Wi-Fi pairing(long press)
Medium speed
Low speed
On/Off (light)
High speed
Off (fan)
RF clearing(long press)
The iFan03 supports the remote controller with 433.92MHz frequency brand to turn
on/off, after pairing with one button, all buttons can control the connected device,
which is local short-range wireless control not Wi-Fi control.
Long press for 5s until the ceiling fan makes two sounds “di di” to clear the code
successfully.
Long press for 5s until the fan makes two short and one long "bi" sound to enter the
quick pairing mode (Touch). then you can add the light on eWeLink APP.
Wi-Fi pairing method:
RF clearing method:
Q: Why my device stays “Offline”?
A: The newly added device needs 1 - 2mins to connect Wi-Fi and network. If it stays
offline for a long time, Please judge the problem according to the following
methods:
Common Problems
① Maybe you have entered a wrong Wi-Fi password.
② Maybe there's too much distance between the switch your router or the
environment causes interference, consider getting close to the router. If failed,
please add it again.
③ The 5G Wi-Fi network is not supported and only supports the 2.4GHz wireless
network.
④ Maybe the MAC address filtering is open. Please turn it off.
⑤ Ensure steady enough network.
⑥ If none of the above methods solved the problem, you can open the mobile data
network on your phone to create a Wi-Fi hotspot, then add the device again.
To Next Page
Loading...
Need help?
General
