Sonoff MINI Extreme MINIR4 - Device Setup and Operation; Powering On and Bluetooth Pairing Mode; Adding the Device to the App

English
3.Add device
Tap “+” and select “Bluetooth Pairing”, then operate following the prompt on the App.
2. Power on
After powering on, the device will enter the Bluetooth Pairing Mode defaulted during
the first use, and the Network indicator flashes in a cycle of two short and one long.
The device will exit the Bluetooth Pairing Mode if not been paired within 10mins. If
you want to enter this mode again, please long press the button for 5s until the
Network indicator flashes in a cycle of two short and one long and then release.
11