Sonoff RF Bridge - Add Sub-devices; Technical Specifications

6
Add sub-devices
Tap "+" and select the remote controller type, then a "Beep" indicates that the device
enter quick pairing mode. Proceed to operate on the sub-device to pair and "Beep Beep"
indicates that the pairing is successful.
! Please refer to the user manual of the sub-device for pairing method.
! The device can add up to 16 sub-devices.
Specifications
Model
RF Bridge/RF BridgeR2
Input
5V 1A
RF
433.92MHz
Wi-Fi
IEEE 802.11 b/g/n 2.4GHz
Operating systems
Android & iOS
Working temperature
-10℃~40℃
Material
RF Bridge: ABS V0/RF BridgeR2: PC V0
Dimension
62x62x20mm