Sonoff TH10 Manual

1.3. Green led quickly blinks twice and repeats, this means the device has connected to the router but
failed to connect to the server. Then please confirm your WiFi router works normally.
2. Why the APP can’t find the device in pairing status?
Answers: That’s because of your phone’s cache. Please close the WLAN of your phone then open it after a
minute. At the same time, please power off the device if you can, then power up to try again.
3. My WiFi is expired, can I connect the devices to LAN? Can my phone be directly connected to device
hotspot?
Answers: Currently this product does not support LAN or directly connect to hotspot. It must connect to
the WiFi router.
4. The green led keeps off, even if the device is powered on. Pressed the button but the device does not
work.
Answers: The circuit may be broken, please send it back for testing. Return shipping postage and packaging
will be at buyer’s expense, if the device is damaged by the buyer, and so the buyer should bear extra repair
cost.

Sonoff TH10 Specifications

General

Model	Sonoff TH10
Category	Switch
Input Voltage	90-250V AC
Output Voltage	90-250V AC
Max Current	10A
Max Power	2200W
Wireless Standard	802.11 b/g/n
Security Mechanism	WPA-PSK/WPA2-PSK
Operating Temperature	-10°C to 40°C
Operating Humidity	5%-90% RH, non-condensing
Wireless Connectivity	Wi-Fi
Temperature Sensor	Optional (Si7021, AM2301, DS18B20)
Humidity Sensor	Optional (Si7021, AM2301)