Sonos ZonePlayer 90 Setup Guide
7
Attach the power cord, and then connect your ZonePlayer 90 to an external amplifier by
choosing one of the following options:
Connect to a home theater or amplifier
• If you have digital inputs on your home theater or amplifier, you can use either a
TosLink optical audio cable or a digital coaxial cable to connect the
ZonePlayer 90’s digital output to the digital input on the receiver.
• If you have analog inputs on your home theater or amplifier, use a standard RCA au-
dio cable to connect a ZonePlayer’s analog audio output to the audio inputs on
the receiver.
• Select the proper input channel on the receiver.
• After you finish setting up your Sonos system, turn to page 19 to adjust the
volume settings.
Connect to a computer or powered speakers
• You will need a stereo mini to RCA Y-adapter audio cable (one 1/8-inch
stereo miniplug to dual RCA male connectors) to connect the ZonePlayer’s
analog audio output to the computer’s audio input.
• You may need a Y-adapter audio cable (one1/8-inch stereo miniplug to dual RCA
male connectors) to connect the speakers to the audio outputs on the ZonePlay
-
er. If your speakers have a male 1/8-inch stereo plug, you will need to attach a fe-
male-to-female coupler between the speaker plug and the
Y-adapter audio cable.
For additional information on connecting audio devices, please go to our Web site at
http://faq .sonos.com/c ables.
To Next Page
Loading...
