Sonos ZonePlayer 90 - Page 25

Sonos ZonePlayer 90 Setup Guide
18
Analog audio out
(fixed/variable)
Use a standard RCA audio cable to connect the
ZonePlayer’s analog audio outputs to the audio
inputs on a separate audio component, such as an
amplifier or your home theater receiver.
TosLink® digital audio out You can use a TosLink optical audio cable to connect
the ZonePlayer’s TosLink digital audio output to the
audio inputs on a separate audio component, such
as an amplifier or your home theater receiver.
Coaxial digital audio out You can use a digital coaxial cable to connect the
ZonePlayer’s coaxial digital audio output to the
audio inputs on a separate audio component, such
as an amplifier or your home theater receiver.