A6T/A6/A5 Portable Ultrasonic Diagnostic System
4701-0040-01A
3-98
4. The format for the files in the USB disk is fixed, and two fixed files:
license.dat, upgradeXXX.dat is included. In the disk, “license.dat” is
the license file for system upgrade, which includes information of
the serial number for the system to be upgraded and the software
release for upgrade. This file is specific to different machines.
“upgradeXXX.dat” is the upgrade package, XXX refers to the
software release; only when “license.dat” is the right one for the
upgrade target machine, and can the system be upgraded.
Here are the specific upgrade steps:
1. Power up the system, and go to the normal imaging screen;
2. Plug in the special USB disk for upgrade purpose. At the bottom
right of the screen it displays a USB disk icon;
3. Key in shift, menu, e, and an upgrade prompt box is displayed;
4. Input the upgrade license of the target machine, and click OK;
5. The system will be upgraded automatically. When the upgrade is
finished, the system will be rebooted;
NOTE:
The current software release is saved in System Setting menu, in the
form like Ver 1.01.
To Next Page
Loading...
Need help?
General
