Do you have a question about the SonoSite iViz and is the answer not in the manual?
Identifies the physical components and ports on the front of the SonoSite iViz system.
Details the interactive elements and information displayed on the touchscreen during scan mode.
Guidance on installing the battery and interpreting its charging status via LED indicators.
Instructions on how to properly connect transducers to the system's port.
Explanation of common touchscreen gestures for system navigation and interaction.
Steps for turning on the system and choosing the desired exam type.
Describes the different imaging modes: 2D, M Mode, and Color Doppler.
Guidance on adjusting gain and depth settings during a scan.
Instructions on how to freeze images and navigate through captured frames (cine).
Details on adding text labels and arrows to images for annotation.
Steps for exporting and sharing studies via PACS, Tricefy, or USB.
Procedure for managing patient information and studies.
How to measure linear distances using calipers on a frozen image.
Instructions for measuring elliptical shapes and tracing custom outlines.
Procedure for calculating heart rate from an M-Mode trace.
Provides contact details for FUJIFILM SonoSite support and representatives.
Information about the manufacturer, authorized representative, and Australian sponsor.
| Input Voltage | 100-240 VAC |
|---|---|
| Input Frequency | 50/60 Hz |
| Compatibility | SonoSite iViz |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
Loading...