EasyManua.ls Logo

Sonotec SONAPHONE RD - User Manual

Sonotec SONAPHONE RD
26 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SONOTEC
Spectrum Instruments Ltd
126 West Ridge Drive
Stittsville, Ontario K2S 2H1 Canada
Tel: 613 . 831 . 0007
Fax: 613 . 831 . 0008
http://www.spectrum-instruments.com
E-mail: Info@spectrum-instruments.com
Ultrasonic
Leak Detector and Seal Control Device
SONAPHONE RD
Operating Manual

Table of Contents

Questions and Answers

  • V
    Vicki MillerAug 10, 2025
    What to do if there is no acoustic signal from Sonotec Measuring Instruments?
    • M
      Michael GarciaAug 10, 2025
      If you're not getting any sound from your Sonotec Measuring Instruments, here are a few things to check: * Make sure the volume isn't set too low and adjust it accordingly. * Ensure the probe and headphone are fully plugged in. * The device may have switched off automatically, so try switching it on again. * If none of these steps work, test with another probe to check for defects.
  • M
    Mary ButlerAug 26, 2025
    Why is there no acoustic signal when using the transmitter (SONAPHONE T) with Sonotec SONAPHONE RD?
    • J
      Jennifer LeeAug 27, 2025
      If you're not getting any sound when using the transmitter (SONAPHONE T) with your Sonotec Measuring Instruments, ensure that the transmitter is switched on. It may have switched off automatically after a long period of use.

Sonotec SONAPHONE RD Specifications

General IconGeneral
BrandSonotec
ModelSONAPHONE RD
CategoryMeasuring Instruments
LanguageEnglish