Need help?Do you have a question about the Sonus Faber Aida and is the answer not in the manual?
General| Type | Floorstanding |
|---|---|
| Sensitivity | 92 dB SPL (2.83V/1 m) |
| Impedance | 4 ohms |
| Tweeter | 29 mm |
| Woofer | 220 mm |
| Ultra-woofer | 320 mm |
| Power Handling | 100-1000W |
| Dimensions | 1725 mm x 482 mm x 780 mm (HxWxD) |
Provides essential user guidance and recommendations for the Aida loudspeakers.
Details warranty coverage, conditions, and procedures for after-sales support.
States the Aida loudspeakers' compliance with relevant EU directives and standards.
Key safety measures for handling, placement, and operation to prevent damage or injury.
Step-by-step instructions for safely removing the Aida loudspeakers from their packaging.
A comprehensive list of all items included in the Aida loudspeaker packaging.
Procedures for preparing the loudspeakers for positioning after initial unpacking.
Guidance on safely moving the Aida loudspeakers to their final listening position.
Instructions for detaching handling slides and load-bearing bars from the trolley.
Steps for attaching handling and load-bearing bars to the second loudspeaker.
Advice on optimal placement of loudspeakers for the best listening experience.
Details on how to adjust specific Aida unit controls for sound optimization.
Recommendations for positioning loudspeakers within a room for superior acoustic performance.
Requirements for amplifier power and quality to drive the Aida loudspeakers effectively.
Instructions and diagrams for connecting the Aida loudspeakers to audio amplification systems.
Procedure for a standard single-amplifier connection to the loudspeakers.
Methods for connecting the loudspeakers using two pairs of speaker cables.
Procedure for connecting the loudspeakers using three pairs of speaker cables.
Instructions for connecting the loudspeakers using two stereo amplifiers.
Method for connecting the loudspeakers using three stereo amplifiers.
Steps to optimize the Sound Field Shaper's function based on room acoustics.
Guide to adjusting low and high frequency levels for optimal sound output.
Guidelines for routine cleaning and maintenance to preserve the loudspeakers' finish.
Instructions for environmentally responsible disposal of the loudspeakers at end-of-life.
Describes the overall system technology and design of the loudspeakers.
Details specifications for individual speaker drivers like tweeters, midranges, and woofers.
Outlines key performance metrics like frequency response, sensitivity, and impedance.
Lists physical dimensions and weight of the loudspeakers.
Visual illustrations and diagrams supporting installation and component identification.
To Next Page
