Do you have a question about the Sonus Faber IL CREMONESE and is the answer not in the manual?
Sensitivity | 92 dB SPL (2.83V/1 m) |
---|---|
Nominal Impedance | 4 ohm |
Type | 3-way floorstanding speaker |
Midrange | 150 mm midrange driver |
Woofers | 2 x 8" woofers |
Suggested Amplifier Power | 100W - 500W |
Weight | 84 kg each |
Finish | Red |
Crossover Frequency | 250 Hz |
Welcomes the customer and emphasizes reading the instruction manual before use.
Provides recommendations for safely opening the speaker packaging.
Lists all accessories and components found in the speaker package.
Step-by-step instructions for attaching the front and side grilles.
Describes the standard stereo connection using a single set of cables.
Explains bi-wiring for improved detail resolution, especially at low frequencies.
Details bi-amplification for greater dynamics and bass control using separate amplifiers.
Offers guidance on ideal speaker placement, room acoustics, and listening positions.
Provides recommendations for cleaning and preserving the speaker's finish and components.
Outlines the terms and conditions of the product warranty and how to make a claim.
Details the speaker's system configuration and the construction of its cabinet.
Technical specifications for the Tweeter, Midrange, Woofer, and Infra Woofer drivers.
Key performance metrics including frequency response, sensitivity, impedance, and power handling.
Essential precautions for stable speaker installation and safe handling to prevent damage.
Warnings regarding high listening volumes and maintaining safe distances from speakers for hearing protection.
Guidance on potential electromagnetic interference and appropriate placement of electronic devices.
Confirmation of compliance with California Air Resources Board regulations on formaldehyde emissions.