EasyManua.ls Logo

Sony Ericsson PLAY - Setup guide

Sony Ericsson PLAY
103 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
Place the cover over the back of the phone so that the camera lens hole in the cover
is aligned with the camera lens.
2 Press down firmly on all edges of the battery cover to make sure it gets
attached tightly. Otherwise, your memory card might not function properly.
Turning on the phone
To turn on the phone
1
Press and hold down the power
key on the top of the phone until it vibrates.
2
If your screen goes dark, press
or press briefly to activate the screen.
3
To unlock the screen, drag to the right across the screen.
4
Enter your SIM card PIN when requested, and select OK.
Your SIM card PIN is initially supplied by your network operator, but you can change it later from
the Settings menu. To correct a mistake made while entering your SIM card PIN, press
.
To turn off the phone
1
Press and hold down
until the options menu opens.
2
In the options menu, tap Power off.
3
Tap OK.
Screen lock
When your phone is on and left idle for a set period of time, the screen darkens to save
battery power, and locks automatically. This lock prevents unwanted actions on the touch
screen when you are not using it.
To activate the screen
Press or press briefly.
To unlock the screen
Drag the
icon to the right across the screen.
To lock the screen manually
When the screen is active, briefly press the key.
Setup guide
The first time you start your phone, a setup guide explains basic phone functions and helps
you enter essential settings. Set up your phone so that it works to your needs. Import your
old contacts, select your phone language, optimise your wireless network connection
settings, and much more.
The setup guide covers the following:
9
This is an Internet version of this publication. © Print only for private use.

Table of Contents

Related product manuals