50 Setting up mobile Internet
• Passwd request (Password request) – if this setting
is on, you are asked for a password each time you
log on to the external data network.
• Allow calls (Preferred service) – if you want to be
able to accept incoming calls during a GPRS
session, select Automatic. If not, select GPRS only.
• IP address – the IP address that the phone uses
when communicating with the network. If you do
not enter an address, the network provides you with
a temporary IP address.
• DNS address – if the network does not provide the
IP address to the DNS server automatically, you
may enter it here.
• Advan. settings (Advanced settings) – these are
optional. Consult your network operator.
GSM settings include some settings that are
similar to GPRS settings and some that are
GSM specific as follows:
• Phone number – the phone number of your
Internet service provider.
• Data rate – select the speed you want for
the connection.
• Dial type – select analogue or ISDN connection.
Note: If you want to change access type, you have to
create a new data account and select the access type
you want to use.
To create a data account manually
1. Scroll to Connect,
YES
, Data comm.,
YES
,
Data accounts,
YES
, Add account?,
YES
.
2. Select an account type for access.
3. Enter a name for the data account.
4. Enter the settings that you have received from your
network operator or service provider.
Confirm each setting by pressing
YES
.
5. Scroll to Save?,
YES
.
To edit a data account
1. Scroll to Connect,
YES
, Data comm.,
YES
, Data
accounts,
YES
.
2. Select a data account,
YES
.
3. Select Edit.
4. Select the setting you want to edit,
YES
. Edit the
setting,
YES
.
5. Repeat step 4 for other settings you want to edit.
Preferred service
You can set GPRS or GSM as the preferred service.
This is the Internet version of the user’s guide. © Print only for private use.
To Next Page
Loading...
