This is the Internet version of the user's guide. © Print only for private use.
Setting up WAP and e-mail 63
GSM settings include some settings that are similar
to GPRS settings and some that are GSM specific
as follows:
• The phone number of your Internet service
provider.
• Select the speed you want for the connection.
• Select analogue or ISDN connection.
Note: If you want to change access type, you have to
create a new data account and select the access type
you want to use.
Preferred service
You can set GPRS or GSM as the preferred service.
To select preferred mode
Scroll to
Connectivity
, Data comm.,
Preferred
service and select
GPRS and GSM or
GSM only.
WAP security
Your phone has support for WAP secure browsing.
When you turn on security, the connection between
your phone and the WAP gateway is secure.
Note: Security for a connection between a WAP
gateway and a WAP service provider is the
responsibility of the WAP service provider.
To turn on a secure connection
1. Scroll to
Connectivity,
WAP options,
WAP profiles.
2. Select the profile to be used. Press
Edit
.
3. Select
Advanced, Security
.
4. Select
On or Off.
Security module (Locks)
The security module is located on the SIM card, if
your network operator or service provider supplies
such a service. It can contain both certificates and
your private keys. The security module is protected
by a special access PIN and your phone asks you for
it when establishing a secure connection.
To enter the access PIN (for the security module)
and the signature PIN
Scroll to
Connectivity
, WAP options, Security
, Locks
.
To Next Page
Loading...
