Bluetooth™ wireless technology
The Bluetooth™ function creates a wireless connection to other Bluetooth™ devices, for
example, handsfree devices. A range within 10 metres (33 feet), with no solid objects in
between, is recommended. You must turn on the Bluetooth™ function to communicate
with other devices. You may also have to pair your phone with other Bluetooth™ devices.
To turn on the Bluetooth™ function and make your phone visible
1
From the Home screen, drag upwards.
2
Find and tap Settings > Wireless controls.
3
Mark the Bluetooth checkbox. appears in the status bar.
4
Tap Bluetooth settings.
5
Mark the Discoverable checkbox. The phone will now be visible to other devices
for 120 seconds.
Phone name
You can enter a name for your phone that is shown to other devices when using Bluetooth™
wireless technology.
To enter a phone name
1
Make sure Bluetooth™ is turned on.
2
From the Home screen, drag upwards.
3
Find and tap Settings > Wireless controls > Bluetooth settings > Device name.
4
Enter the phone name.
5
Tap OK.
Pairing with another Bluetooth™ device
When you pair your phone with another device, you can, for example, connect your phone
to a Bluetooth™ handsfree or a Bluetooth™ car kit and use these devices to make and
receive calls.
Once you have paired your phone with a Bluetooth™ device the phone will remember this
pairing. When pairing the phone with a Bluetooth™ device, you may need to enter a
passcode. Your phone will automatically try the generic passcode 0000. If this does not
work, refer to your Bluetooth™ device documentation for the device passcode. You do not
need to re-enter the passcode the next time you connect to a paired Bluetooth™ device.
Some Bluetooth™ devices, for example, most Bluetooth™ headsets, require you to both
pair and connect in order for it to work properly.
You can pair your phone with several Bluetooth™ devices, but only connect to one
Bluetooth™ profile at the same time.
To pair the phone with another Bluetooth™ device
1
From the Home screen, drag upwards.
2
Find and tap Settings > Wireless controls > Bluetooth settings.
3
Tap Scan for devices. The Bluetooth™ devices found will be listed under Bluetooth
devices.
4
Tap the Bluetooth™ device that you want to pair with your phone.
5
Enter a passcode, if required.
6
You can now start using the paired Bluetooth™ device. The status of the pairing and
connection is shown below the name of the Bluetooth™ device in the Bluetooth
devices list.
Make sure that the device you want to pair your phone with has the Bluetooth™ function activated
and Bluetooth™ visibility turned on.
59
This is an Internet version of this publication. © Print only for private use.
To Next Page
Loading...
