Sony a7SIII - 5: Performing initial setup for the camera

ILCE-7SM3
5-060-467-41(1)
EN
6
\\Win-473\camera\CX85000(OT)UUD_IM\Multi\04_Compose\5060467411_14lang\5060467411ILCE7SM3CEC\01EN-ILCE7SM3CEC\020PRE.indd
DTP data saved: 2023/12/27 17:47
PDF file created: 2024/01/19 12:00
2
While pushing the lens lightly toward the camera, turn the lens
slowly in the direction of the arrow until it clicks into the locked
position.
5: Performing initial setup for the camera
By establishing a Bluetooth connection (pairing) between the camera and
a smartphone, you can perform initial camera setup such as date and time
settings from the smartphone. Install the dedicated application on your
smartphone in advance, and then follow steps 1 to 3 under “Procedures
for initial camera setup.”
Installing the dedicated smartphone application
Install the application from the following website. Also,
update to the latest version of the dedicated application.
The specifications of the dedicated application may
change without notice.
https://www.sony.net/ca/
Procedures for initial camera setup
ON/OFF (Power) switch
Control wheel/center button
1
Set the ON/OFF (Power) switch to “ON” to turn on the camera.