AXS-R7
Introduction
This document describes how to update the AXS-R7
firmware to the latest version.
You will need to save the update data to a USB storage
device before performing update.
Preparation
Preparing the USB Storage Device
Use a USB storage device with a capacity of 4 GB to
32 GB.
1
Format the USB storage device on a computer, for
example.
The format conditions are as follows.
• File system: FAT32
• Allocation unit size: 32 KB
Version update cannot be performed under conditions
other than the above.
2
Save the update data to the root directory of the
formatted USB storage device.
Do not store any other data on the USB storage
device.
Precautions for Version Update
Use the recommended AC-DN10 or AC-DN2B AC
adapter.
Note
© 2018 Sony Corporation 4-736-142-11 (1)
To Next Page
Need help?
General
