Troubleshooting Guide
No sound is heard when using the HDMI
connection from the Blu-ray Disc player.
Check the settings of HDMI Audio Output in System Settings.
When HDMI Audio Output is set to HDMI2, check the connection of the HDMI OUT 2 jack on
the Blu-ray Disc player and make sure that the connected device is turned on.
To output sound from a TV, connect the TV to the HDMI OUT 1 jack of the Blu-ray Disc player
and change the HDMI Audio Output setting to Auto or HDMI1.
NOTE:
The HDMI OUT 2 jack on the Blu-ray Disc player outputs audio only. When you want to output
both video and audio from the device that is connected to the Blu-ray Disc player, connect the
device to the HDMI OUT 1 jack on the Blu-day Disc player.
What is the supported maximum and
minimum size USB storage device that is
supported by the Blu-ray Disc player?
The Blu-ray Disc player can support the following sizes of USB HDDs, USB memories, and file
systems.
NOTE:
In the case of multiple partitions, only the first partition can be used. Any subsequent partitions
cannot be accessed.
We recommend that you use a Sony external USB HDD or USB memory.
The Blu-ray Disc player is intended to work with third-party products, but operation is not
guaranteed for all USB devices.
Legend:
✔：Compatible
-：Not Compatible
For AP models:
To Next Page
Need help?
General
