Sony BDP-S6500 - Audio Settings]

30
BDP-S6500/BDP-BX650
4-571-032-11(1)
master page=left
E:\SONY
DVD\SD140040\4571032111_US\060ADJ.fm
x [4K Output]
[Auto1]: Outputs 2K (1920 × 1080)
video signals during video playback and
4K video signals during photo play when
connecting to a Sony 4K-compatible
equipment.
Outputs 4K video signals during
playback of 24p video contents in
BD ROMs/DVD ROMs/Data content/
Network content or photo play when
connecting to a non-Sony
4K-compatible equipment.
This setting does not work for 3D video
image playback.
[Auto2]: Automatically outputs 4K/24p
video signals when you connect a
4K/24p -compatible equipment and
make the appropriate settings in [BD-
ROM 24p Output], [DVD-ROM 24p
Output], [Data content 24p Output] or
[Network content 24p Output] and also
outputs 4K/24p photo images when you
play 2D photo files.
[Off]: Turns off the function.
b
If your Sony equipment is not detected when
[Auto1] is selected, the setting will have the
same effect as [Auto2] setting.
x [YCbCr/RGB (HDMI)]
[Auto]: Automatically detects the
connected TV type, and switches to the
matching color setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2
video signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4
video signals.
[RGB]: Outputs RGB video signals.
x [HDMI Deep Color Output]
[Auto]: Normally select this.
[16bit]/[12bit]/[10bit]: Outputs 16bit/
12bit/10bit video signals when the
connected TV is compatible with Deep
Color.
[Off]: Select this when the picture is
unstable or colors appear unnatural.
x [SBM] (Super Bit Mapping)
[On]: Smooths the gradation of video
signals output from the HDMI OUT
jack.
[Off]: Select this when outputting
distorted video signals or unnatural
color.
x [IP Content NR Pro]
[Video3]/[Video2]/[Video1]/
[Film1]/[Film2]
/[Film3]: Adjust the
picture quality for Internet content.
[Off]: Turns off the function.
x [Pause Mode]
[Auto]: Normally select this. Dynamic
moving pictures appear without blurring.
[Frame]: Displays static pictures at high
resolution.
[Audio Settings]
x [Digital Audio Output]
[Auto]: Normally select this. Outputs
audio signals according to the status of
the connected devices.
[PCM]: Outputs PCM signals from the
DIGITAL OUT (COAXIAL)/HDMI
OUT jack.