16
Playback
Playing a Disc
For playable discs, see “Playable discs”
(page 36).
1 Switch the input selector on your TV so
that the signal from the player
appears on your TV screen.
2 Press Z OPEN/CLOSE, and place a
disc on the disc tray.
3 Press Z OPEN/CLOSE to close the
disc tray.
Playback starts.
If playback does not start automatically,
select in the (Video), (Music),
or (Photo) category, and press
ENTER.
Some BD-ROMs with the “BD-LIVE” logo*
have bonus content and other data that can be
downloaded for enjoyment.
*
1 Connect a USB memory to the USB
jack on the rear of the player (page 9).
As your local storage, use a 1 GB or
larger USB memory.
2 Prepare for BD-LIVE (BD-LIVE only).
• Connect the player to a network
(page 14).
• Set “BD Internet Connection” to
“Allow” (page 29).
3 Insert a BD-ROM with BONUSVIEW/
BD-LIVE.
The operation method differs depending
on the disc. Refer to the instruction
manual supplied with the disc.
z
To delete data in the USB memory, select “Erase
BD Data” in the (Video), and press ENTER.
All data stored in the buda folder will be erased.
You can enjoy a Blu-ray 3D Disc with the
“Blu-ray 3D” logo*.
*
1 Prepare for Blu-ray 3D Disc playback.
• Connect the player to your 3D-
compatible devices using a High Speed
HDMI cable.
• Set “3D Output Setting” and “TV
Screen Size Setting for 3D” in the
“Screen Settings” setup (page 26).
2 Insert a Blu-ray 3D Disc.
The operation method differs depending
on the disc. Refer to the instruction
manual supplied with the disc.
z
Refer also to the instruction manuals supplied with
your TV and the connected device.
Enjoying BONUSVIEW/BD-LIVE
Playing side facing down
Enjoying Blu-ray 3D
To Next Page
Loading...
