26
US
Getting Started
• Depending on the input stream, the surround settings may not be effective.
• When you play a Super Audio CD, surround settings are not activated.
• You can also select the surround setting in [Surround Setting] of [Audio Settings] (page 49).
• For functions other than “BD/DVD,” you can check whether [Dolby Pro Logic] (“PRO LOGIC”), [Dolby PL II
Movie] (“PLII MOVIE”), or the DTS Neo:6 mode is activated by pressing DISPLAY repeatedly so that the stream
information/decoding status appears in the front panel display.
To Next Page
Loading...
