124
GB
[Photo Settings]
You can make the photo-related settings.
x [Slideshow Speed]
You can change the slideshow speed.
[Fast]: Photos change rapidly.
[Normal]
: Photos change at normal speed.
[Slow]: Photos change slowly.
[HDMI Settings]
You can make the HDMI settings.
x [Control for HDMI]
You can set the [Control for HDMI] function to
on/off. This function is available when you
connect the system and TV with an HDMI cable.
For details, see “Using the Control for HDMI
Function for “BRAVIA” Sync” (page 105).
[On]: On. You can operate mutually between
components that are connected with an HDMI
cable.
[Off]
: Off.
Note
• This function is available only when you connect the
unit and TV with the HDMI cable.
x [Volume Limit]
If you change the output method of the TV to the
system speaker on the TV menu or by pressing
THEATRE, the System Audio Control
(page 107) is activated and loud sound may be
output depending on the volume level of the
system. You can prevent this by limiting the
maximum level of the volume.
[Level3]: Maximum volume level is set to 15.
[Level2]
: Maximum volume level is set to 20.
[Level1]: Maximum volume level is set to 30.
[Off]: Off.
Note
• This function is available only when you connect the
unit and TV with the HDMI cable and [Control for
HDMI] is set to [On].
To Next Page
Loading...
