57
GB
BDV-N9200W/BDV-N9200WL/BDV-N7200W/BDV-N7200WL/BDV-N5200W
4-485-800-13(1)
D:\NORM'S JOB\SONY HA\SO140001\BDV-N9200_7200_5200_E3200
(PMRF 02)\4485800131_GB (CEK)\090SET.fm
masterpage:
Right
x [Output Video Resolution]
[Auto]: Outputs video signal according
to the resolution of the TV or connected
equipment.
[Original Resolution]: Outputs video
signal according to the resolution
recorded on the disc. (When the
resolution is lower than SD resolution, it
is scaled up to SD resolution.)
[480i/576i]*, [480p/576p]*, [720p],
[1080i], [1080p]: Outputs video signal
according to the selected resolution
setting.
* If the color system of your disc is NTSC,
the video signals resolution can be
converted to [480i] and [480p] only.
x [BD-ROM 24p Output]
[Auto]: Outputs 24p video signals only
when you connect a 1080/24p-
compatible TV via an HDMI connection
and the [Output Video Resolution] is set
to [Auto] or [1080p].
[On]: Select this when your TV is
compatible with 1080/24p video
signals.
[Off]: Select this when your TV is not
compatible with 1080/24p video
signals.
x [DVD-ROM 24p Output]
[Auto]: Outputs 24p video signals only
when you connect a 1080/24p-
compatible TV via an HDMI connection
and the [Output Video Resolution] is set
to [Auto] or [1080p].
[Off]: Select this when your TV is not
compatible with 1080/24p video
signals.
x [4K Output]
[Auto1]: Outputs 2K (1920 × 1080) video
signals during video playback and 4K
video signals during photo play when
connecting to a Sony 4K-compatible
equipment.
Outputs 4K video signals during
playback of 24p video contents in
BD/DVD ROMs or photo play when
connecting to a non-Sony
4K-compatible equipment.
This setting does not work for 3D video
image playback.
[Auto2]: Automatically outputs
4K/24p video signals when you connect
a 4K/24p-compatible equipment and
make the appropriate settings in
[BD-ROM 24p Output] or [DVD-ROM 24p
Output], and also outputs 4K/24p photo
images when you play 2D photo files.
[Off]: Turns off the function.
If your Sony equipment is not detected
when [Auto1] is selected, the setting will
have the same effect as [Auto2] setting.
x [YCbCr/RGB (HDMI)]
[Auto]: Automatically detects the type
of external equipment, and switches to
the matching color setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2
video signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4
video signals.
[RGB]: Select this when connecting to
an equipment with an HDCP compliant
DVI jack.
x [HDMI Deep Colour Output]
[Auto]: Normally select this.
[16bit], [12bit], [10bit]: Outputs 16bit/
12bit/10bit video signals when the
connected TV is compatible with Deep
Colour.
[Off]: Select this when the picture is
unstable or colors appear unnatural.
Note
To Next Page
Loading...
